MOBOTIX dual lens, day/night camera with two separate HiRes image sensors is successfully in use in over 100,000 installations worldwide. Brilliant color for the day and extremely light-sensitive black/white sensor for the night. The intelligent and robust professional solution from MOBOTIX with no moving parts!

• Two separate image sensors for day and night-time operation
• Integrated DVR with HiRes video recording
• Permanently fixed lenses at factory for extremely simple installation
• Robust, low-maintenance and with concealed cable duct
• Weatherproof from -30° to +60°C (-22° to +140°F), without need for heating (IP65)
• Digital continuous zoom, pan and tilt
• Integrated microphone, speaker and PIR motion detector

The MOBOTIX camera does not require any software installation; all you need is your preferred browser with JavaScript support to operate the camera. Thus, the MOBOTIX camera is supported by all common operating systems (such as Windows, Macintosh and Linux).

*If the camera is supplied with Power over Ethernet (a PoE switch), then no other device will be necessary for supplying power.

Establishing the Power Supply to the Camera:

Power Supply (MxPoE) Using a Switch

• Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter.
• Connect the LAN/Power connector of the Network Power Adapter to an Ethernet connector of the switch/router or the Ethernet wall outlet.
• Plug the RJ45 connector of the external power unit into the PC/Power connector of the Network Power Adapter.

Power Supply (MxPoE) When Connected Directly to a Computer

• Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter.
• Connect the PC/Power connector of the Network Power Adapter to the Ethernet port of the computer.
• Plug the RJ45 connector of the external power unit into the LAN/Power connector of the Network Power Adapter.

Power Supply (MxPoE) Using a Network Power Rack or Network Power Box

• Connect the factory pre-installed cable of the camera to the CAM connector of the Network Power Rack (MX-NPR-8/20) or the Network Power Box (MX-NPR-4).
• Connect the LAN connector of the Network Power Rack or Network Power Box to an Ethernet connector of the switch/router.

Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products

Connect the factory pre-installed cable of the camera to the Ethernet connector of the PoE switch/router. The switch/router needs to support the PoE standard IEEE 802.3af.