Inconspicuous surveillance with state-of-the-art technology. The D22 FixDome from MOBOTIX adapts perfectly to any task. Exchangeable lenses, various mounting and configuration options including vandalism set support unlimited application possibilities.

• Attractively designed FixDome camera featuring exchangeable lenses from tele to wide-angle
• Numerous installation options both indoor and outdoor
• On-wall set with space for extension modules (battery, UMTS, WLAN, etc.)
• Integrated DVR with HiRes video recording
• Robust, low-maintenance and weatherproof from -30° to +60°C (-22° to +140°F), (IP65)
• Digital continuous zoom, pan and tilt
• Can be upgraded to an intercom system with the MOBOTIX ExtIO module

The MOBOTIX camera does not require any software installation; all you need is your preferred browser with JavaScript support to operate the camera. Thus, the MOBOTIX camera is supported by all common operating systems (such as Windows, Macintosh and Linux).

*If the camera is supplied with Power over Ethernet (a PoE switch), then no other device will be necessary for supplying power.

In-Ceiling Mounting (D22M-OPT-TC)

The In-Ceiling Set allows mounting the camera in fake ceilings, for example. This type of installation provides optimum protection for the camera and reduces the visible profile to a minimum since only the dome is visible.

Vandalism Protection (D22M-OPT-VANDAL-...)

The Vandalism Set provides added protection for the cameras. The set consists of a robust camera ring made from stainless steel and a reinforced dome made from 3 mm thick polycarbonate. A camera equipped with the Vandalism Set is perfectly suited for applications in demanding environments (such as prisons, social hot-spots, train stations, etc.).

Mounting to a Wall Using the Wall Mount (D22M-OPT-WH)

The Wall Mount is the ideal solution for mounting the camera to walls for indoor and outdoor applications. The camera is absolutely dustproof and resistant against water jets (IP65). The wall mount also covers RJ45 wall outlets and also has ample space for additional modules.

Mounting to Poles Using the Corner and Pole Mount (D22M-OPT-MH)

If you would like to mount the camera to a pole or the corner of a building, you should consider using the MOBOTIX Corner and Pole Mount. This mount can only be used in conjunction with the wall mount. The supplied stainless steel straps allow fixing the mount to poles with diameters between 60 and 180 mm (2.4 to 7.1 in).